After-sales Service: | Have |
---|---|
Warranty: | One Year |
Display: | Both |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
1. Timing function
B. Power on detection function: Automatically display the current remaining battery level when powered on.
C. Voltage recognition function: Automatically recognize 12V/24V/36V/48V voltage when powered on.
D. Low battery reminder: When the remaining battery is 20%, the second yellow light flashes. When the remaining battery is 10%, the first red light and the second yellow light alternate to remind charging.
E. Discharge delay function: When the battery capacity is greatly consumed (such as when an electric vehicle is climbing a hill), there is a delay of 155S to prevent the battery level display from rising or falling too quickly, allowing users to know the actual battery capacity.
F. Charging delay function: When the battery is charging, it is displayed in the form of a flowing light, and it rises one level every 200 seconds after charging step by step
3. Battery type selection
A. Applicable to 19 types of battery curves, including lead-acid batteries
Item function |
Battery Indicator with Hour Meter |
Capacity |
1 red 2 yellow 7 green |
Resolution |
10% per led segment / 0.1 hour |
Operating current |
20 MA nomina |
Operating Volt |
12/24V 36V 48V |
Operating Temprature |
-40°-85° |
Accuracy |
Around 0.5% |
Polarity |
Positive / negative |
Memoery capacity |
CMOS EEPROM |
Display Reading |
99,999 hours |
3.Item Function Description
1. 100% quality and Brand new.
2. Works for Lead-acid battery, used for truck, RV'S, Golf cart or any battery operated unit.
3. Temp range: -40F ~ 185F. Connection: Pin+: Battery+, Pin-: Battery-. C-signal output for external use.
4. Operation:Only when the battery is properly charged then the 10th LED (far right) will be lighted. As battery state of charge decreases, successive LED lights up
When 2nd (from left) LED flashes, indicating "energy reserve"
When both 1st and 2nd LED flash, indicating "empty", new battery is needed to replace old one
Battery indicator memorized the battery state is full when leaving factory.
When use with a new battery, it should be powered on for at least 2 minutes to indicate the real battery state
Range indication: Green: 41~100%, Yellow: 21~40%, Red: 20% less
B. A set of custom parameters, users can set their own charging and discharging parameters based on battery parameters
Setting range of vent value: 1.40-2.20V, default 1.73V
Full charge value setting range: 1.70-2.30V, default 2.04V
Charging value setting range: 1.80-2.50V, default to 2.10V
The number of individual battery cores, set from 5 to 26, defaults to 6
4. Voltage function
A. Real time display of battery current voltage when powered on.
B. The voltage display range is: 8-60V
5. Output function
A. When the battery level is ≥ 10%, the relay closes.
B. When the battery level is less than 10%, the relay will disconnect.
it widely used in the RV, electric vehicle, golf cart, AGV and other vehicle industries; Garden machinery such as electric lawn mowers, chainsaws, and pruners; Construction machinery such as construction vehicles, tractors, excavators, and compactors; Storage and handling equipment such as forklifts, stackers, and material handling trucks; Cleaning equipment such as floor scrubbers and cleaning vehicles; And other battery equipment.
Suppliers with verified business licenses